Vertical Laminar Air Flow
Manufacturer of a wide range of products which include vertical laminar air flow unit, vertical laminar flow, vertical laminar air flow bench, vertical laminar flow bench, vertical laminar flow hood and vertical laminar air flow system.
Vertical Laminar Air Flow Unit
₹ 78365/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Motor Blower Speed | 2800 RPM |
| Size | 90 x 60 x 60 cm |
| Motor Blower Power | 1 HP |
| Pre Filter | 5 Micron |
| Phase | Single Phase |
| Maghnehlic Guage | 25 mm |
| Hepa Filter | 0.3 Micron |
| Flourscent Light | 300 Lux |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Flow
₹ 65784/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Motor Blower Speed | 2800 RPM |
| Flourscent Light | 300 Lux |
| Phase | Single Phase |
| Motor Blower Power | 1 HP |
| Pre Filter | 5 Micron |
| Hepa Filter | 0.3 Micron |
| Maghnehlic Guage | 25 mm |
| Size | 60 x 60 x 60 cm |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow Bench
₹ 127695/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Motor Blower Speed | 2800 RPM |
| Hepa Filter | 0.3 Micron |
| Motor Blower Power | 1 HP |
| Size | 1800 x 600 x 600 mm |
| Flourscent Light | 300 Lux |
| Pre Filter | 5 Micron |
| Maghnehlic Guage | 25 mm |
| Phase | Single Phase |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Flow Bench
₹ 86974/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Maghnehlic Guage | 25 mm |
| Hepa Filter | 0.3 Micron |
| Pre Filter | 5 Micron |
| Size | 1200 x 600 x 600 mm |
| Motor Blower Power | 1 HP |
| Phase | Single Phase |
| Flourscent Light | 300 Lux |
| Motor Blower Speed | 2800 RPM |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Flow Hood
₹ 65780/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Pre Filter | 5 Micron |
| Hepa Filter | 0.3 Micron |
| Motor Blower Speed | 2800 RPM |
| Size | 600 x 600 x 600 mm |
| Maghnehlic Guage | 25 mm |
| Phase | Single Phase |
| Flourscent Light | 300 Lux |
| Motor Blower Power | 1 HP |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow System
₹ 127200/Piece Get Latest Price
| Brand | Malhar |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Hepa Filter | 0.3 Micron |
| Flourscent Light | 300 Lux |
| Motor Blower Speed | 2800 RPM |
| Motor Blower Power | 1 HP |
| Pre Filter | 5 Micron |
| Phase | Single Phase |
| Maghnehlic Guage | 25 mm |
| Size | 6 x 2 x 2 ft |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow Workstation
₹ 86940/Piece Get Latest Price
| Brand | Malhar |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Pre Filter | 5 Micron |
| Hepa Filter | 0.3 Micron |
| Motor Blower Power | 1 HP |
| Maghnehlic Guage | 25 mm |
| Flourscent Light | 300 Lux |
| Motor Blower Speed | 2800 RPM |
| Phase | Single Phase |
| Size | 4 x 2 x 2 ft |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Laminar Air Flow IVF Version
₹ 78870/Piece Get Latest Price
| Brand | Malhar |
| Material | SS |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Orientation | Vertical |
| Motor Blower Power | 1 HP |
| Hepa Filter | 0.3 Micron |
| Maghnehlic Guage | 25 mm |
| Pre Filter | 5 Micron |
| Material Grade | SS304 |
| Flourscent Light | 300 Lux |
| Size | 3 x 2 x 2 ft |
| Phase | Single Phase |
| Motor Blower Speed | 2800 RPM |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow
₹ 65398/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Size | 24 x 24 x 24 inch |
| Flourscent Light | 300 Lux |
| Motor Blower Power | 1 HP |
| Phase | Single Phase |
| Maghnehlic Guage | 25 mm |
| Motor Blower Speed | 2800 RPM |
| Pre Filter | 5 Micron |
| Hepa Filter | 0.3 Micron |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow Cabinet
₹ 127965/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Phase | Single Phase |
| Flourscent Light | 300 Lux |
| Hepa Filter | 0.3 Micron |
| Motor Blower Speed | 2800 RPM |
| Motor Blower Power | 1 HP |
| Pre Filter | 5 Micron |
| Maghnehlic Guage | 25 mm |
| Size | 180 x 60 x 60 cm |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Flow Cabinet
₹ 86887/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Phase | Single Phase |
| Flourscent Light | 300 Lux |
| Pre Filter | 5 Micron |
| Motor Blower Speed | 2800 RPM |
| Motor Blower Power | 1 HP |
| Hepa Filter | 0.3 Micron |
| Maghnehlic Guage | 25 mm |
| Size | 120 x 60 x 60 cm |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow Chamber
₹ 78960/Piece Get Latest Price
| Brand | MPPL |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Motor Blower Power | 1 HP |
| Maghnehlic Guage | 25 mm |
| Pre Filter | 5 Micron |
| Motor Blower Speed | 2800 RPM |
| Size | 900 x 600 x 600 mm |
| Hepa Filter | 0.3 Micron |
| Phase | Single Phase |
| Flourscent Light | 300 Lux |
| Country of Origin | Made in India |
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
Vertical Laminar Air Flow Standing
₹ 65590/Piece Get Latest Price
| Brand | MALHAR |
| Type | Vertical |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Pharmaceutical Industry |
| Voltage | 230V AC |
| Noise Level | Less than 67 dB |
| Frequency | 50 Hz |
| Efficiency | 99.999% |
| Pre Filter | 5 Micron |
| Flourscent light | 300 Lux |
| Phase | Single Phase |
| Motor Blower Power | 1 HP |
| Motor Blower Speed | 2800 RPM |
| Hepa Filter | 0.3 Micron |
| Maghnehlic Guage | 25 mm |
| Size | 2 x 2 x 2 ft |
| Country of Origin | Made in India |
Vertical Laminar Air Flow unit is designed specifically for product protection. The Cabinet is a clean bench which provides ultra clean sterile HEPA filtered class 100 air in an isolated area for operations requiring a particulate free environment where the highly sensitive process activities are carried out.The VLF unit draws air in through the top of the unit through pre filter, through a plenum and vertically down over the work surface and past the lap of the operator. It has the advantage of not pushing air into the operator as in horizontal laminar flow cabinet. The LAF cabinets are used for work with low risk substances and materials, when protection of working item requires a sterile working zone.
Other Details:-
| Complete Made Of Stainless Steel With Acrylic Sheet Door & U.V. Germicidal Lamp Sturdily constructed in rustproof |
| All sharp edges and corners shall be slightly rounded |
| Heavy gauge Mild Steel body for outside cabinet and Filter assembly and Stainless Steel SS304 for working table/bench. |
| Induction motors with backward curve impellers |
| The screw threads shall be well and evenly cut and all threaded parts shall fit firmly without play |
| All metal parts shall be finished smooth all over and shall be free from burrs, cracks or other manufacturing defects |
| This blower is fitted with ¼ H.P. Motor and operates at minimum noise. |
| Microprocessor based control panel is located on the equipment |
| Interlocked and programmed to work only when blowers and fluorescent lamps are off and front window is fully closed |
| The Main Table and working area is completely made up of Stainless Steel SS304 grade. |
| Hepa Filter 0.3 Micron Box Type,Moc:Aluminium,Media:Micro Fiber Glass, Efficiency:99.999% down to 0.3 Micron,Grade:H14 |
| Laminar Cabinets are made of Mild Steel coated with rust resistant epoxy powder coating for the outside body and Filter assembly |
| Epoxy Powder coated finish. All brass parts are chromium plated over nickel |
| Capcity : Production capacity 03 nos per week |
X
Product Videos
Biosafety Cabinets Class Ii Type B2
Get QuoteBio Safety Cabinet Class Ii Type B2
Get QuoteSS 304 Static Pass Box
Get QuoteContact Us
Kishor Patil (CEO)
Malhar Pharmatech Private Limited
H. No. 202, Raipada Talav, Shirgaon, Gadga Stop, Virar East
Palghar - 401305, Thane, Maharashtra, India
Send Email